OBJECTIVE: The present study was aimed at evaluating the viability of replacing
18F with
99mTc in dose calibrator linearity testing.
MATERIALS AND METHODS: The test was performed with sources of
99mTc (62 GBq) and
18F (12 GBq) whose activities were measured up to values lower than 1 MBq. Ratios and deviations between experimental and theoretical
99mTc and
18F sources activities were calculated and subsequently compared.
RESULTS: Mean deviations between experimental and theoretical
99mTc and
18F sources activities were 0.56 (± 1.79)% and 0.92 (± 1.19)%, respectively. The mean ratio between activities indicated by the device for the
99mTc source as measured with the equipment pre-calibrated to measure
99mTc and
18F was 3.42 (± 0.06), and for the
18F source this ratio was 3.39 (± 0.05), values considered constant over the measurement time.
CONCLUSION: The results of the linearity test using
99mTc were compatible with those obtained with the
18F source, indicating the viability of utilizing both radioisotopes in dose calibrator linearity testing. Such information in association with the high potential of radiation exposure and costs involved in
18F acquisition suggest
99mTc as the element of choice to perform dose calibrator linearity tests in centers that use
18F, without any detriment to the procedure as well as to the quality of the nuclear medicine service.
Keywords: Nuclear medicine; Dose calibrator; Linearity test; Nuclear instrumentation.